Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S555 - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S555:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 24 cm³/10min ISO 1133
Temperatura 260 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 0.6 % ISO 294-4, 2577
ASTM Data
Índice de fluidez, MFI 21 g/10min ASTM D 1238
Temperatura 260 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 0.006 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Esfuerzo de fluencia 62 MPa ISO 527
Alargamiento a rotura 48 % ISO 527
Módulo de flexión, 23°C 2550 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 44 kJ/m² ISO 180/1A
ASTM Data
Esfuerzo de fluencia a tracción 63.4 MPa ASTM D 638
Alargamiento a la rotura 45 % ASTM D 638
Módulo de flexión 2550 MPa ASTM D 790
Resistencia a la flexión 84.1 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 640 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 91 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 105 °C ISO 75-1/-2
Combustibilidad 5V a espesor h 5VB class IEC 60695-11-20
Espesores de probeta 2.5 mm -
ASTM Data
Combustibilidad UL 94 V-0 - UL 94
Espesores de probeta 1.5 mm -
Estabilidad al calor @ 66 psi 107 °C ASTM D 648
Estabilidad al calor @ 264 psi 93.9 °C ASTM D 648
Temperatura Vicat 110 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1180 kg/m³ ISO 1183
Densidad 1180 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Características especiales
Resistencia mejorada al fuego
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.